Thermal insulation material for plastic injection mould

Extremely expeditious availability Thermal insulation material decrease cost Exact temperture control Process acc. to custom Thermal insulation material description

FRATHERNITTM DN is made from chopped Glass-Fibre, filler  and  temperature-resistant Resin.

FRATHERNITTM DN is developed as a material with cost-performance ratio and can be used up to 200°C.

Technical Data for thermal insulation material

Properties	Test Standard	Unit
Density	DIN 53479	g/cm3	1.80
Flexural Strength                      at 23°C	DIN 53452	N/mm2	140
Compressive Strength            at 23°C                                                      at 200°C	DIN 53454	N/mm2	330 120
Coeff. of Thermal Expansion	DIN 53752	10-6 K-1	18
Thermal Conductivity	DIN 52612	W/mK	0.18
Continuous Application Temperature	-	°C	200
Maximum Application Temperature	-	°C	210
Water Absorption       after 24 h at 23°C	DIN 53495	%	0.3

Availability

FRATHERNITTM DN  can be delivered as sheet cut-offs and finished parts.

Max. sheet dimension      1000 x 2000          mm

Thickness                            3 - 50                     mm

Solutions for thermal insulation material Protection

>Standardized dimensions

>Insulation boards to drawing

>Hot runner insulations

>External surface insulations

 Characteristics thermal insulation material

>Economical components

>Easy machining to shape

>Pricese tool matchup

>High temperature resistance

>Compressive and structural strength

>Low compression set

>Good chemical resistance

>Moisture resistance

>Good insulation values

>Long service life

Technical parameter

Location

Thermal insulation material for plastic injection mould